Mobile Lube performs its "dealer-like" BMW services in accordance with the following professional procedures:

  • Place protective barrier material beneath vehicle to protect driveway
  • Place waste oil collection pan under vehicle
  • Remove drain plug
  • Allow used oil to drain completely
  • Remove old seal from drain plug
  • Remove oil filter
  • Remove old seals from filter housing cover and retaining screw (cartridge type filter only)
  • Clean filter housing cover and retaining screw (cartridge type filter only)
  • Lubricate and install new Genuine BMW O-ring seals on filter housing cover and retaining screw (cartridge type filter only)
  • Clean filter seating area and visually inspect to verify surface is free from debris and old seal (spin-on type filter only)
  • Install new Genuine BMW filter
  • Install filter housing cover (cartridge type filter only)
  • Torque cover (or retaining screw) to proper specification using micro-clic torque wrench (cartridge type filter only)
  • Clean drain plug area and visually inspect to verify surface is free from debris and old seal
  • Lubricate and install new Genuine BMW drain plug seal onto drain plug
  • Install drain plug hand-tight until seated
  • Torque drain plug to proper specification using micro-clic torque wrench
  • Clean any oil drips from drain plug and surrounding area
  • Install engine oil to specified capacity - Mobil (standard oil), Mobil 1 or Genuine BMW (synthetic oil)
  • Install oil filler cap
  • Start engine to circulate oil through filter
  • Shut off engine
  • Check oil level and add, as necessary, to proper capacity
  • Top-off washer fluid, as necessary - Genuine BMW
  • Top-off intensive washer fluid, as necessary - Genuine BMW
  • Top-off brake fluid, as necessary - BMW specified DOT4
  • Top-off power steering fluid, as necessary - BMW specified (several types - depends on model)
  • Top-off hydraulic leveling fluid, as necessary - BMW specified
  • Top-off coolant, as necessary - BMW specified - 100% phosphate-free
  • Check air filter and some micro-filters (depends on access)
  • Inflate tires to specified pressure (or customers preference)
  • Reset oil service/inspection lights, as necessary (or desired)

Back to BMW Service Page

Serving The San Francisco Bay

System Description

Fleet Services

BMW Service

Euro/OEM Services

Cars, Trucks, and Vans

Heavy Equipment

Boats

Why Use Synthetic Oil?

 
HOURS | AREAS | APPOINTMENTS

FAQ | SPECIALS | REPORTS | E-MAIL | HOME